Konica Minolta VI-700 用户手册
35
Chapter
2
File
Menu
Menu
9i
File – Import – Digitizer – One Scan (When VIVID 9i is Selected)
8
Click the [Scan] button to acquire the
first scan data.
A scan will start, and a color image will be
displayed in the Work window area.
displayed in the Work window area.
M
emo
If [Use Color] is not checked (i.e. no check mark is
shown), The scan data has no color image data, and a gray-
scale image will be displayed instead of a color image.
shown), The scan data has no color image data, and a gray-
scale image will be displayed instead of a color image.
• Clicking on the following radio buttons will make
a change to the image displayed in the Work win-
dow area. The data acquired during the scan will
remain unchanged.
dow area. The data acquired during the scan will
remain unchanged.
Item
Explanation
[Mono] radio
button
button
The current image is displayed in
monochrome.
monochrome.
[Color] radio
button
button
The color image acquired from
the scan is displayed.
the scan is displayed.
[Pitch] radio
button
button
The distance data is displayed
in the color that is shown in the
Near-Far color slide bar ac-
cording to the distance from the
object to the digitizer.
in the color that is shown in the
Near-Far color slide bar ac-
cording to the distance from the
object to the digitizer.
• Clicking the [Color Read] button will re-scan for
the color data only. The distance data will not be
updated.
updated.
• Clicking the [Edit] button enables you to delete
the area that is not necessary for three-dimen-
sionalization by specifying it using the mouse.
Messages will appear at the bottom of the Work
window area as shown right, so follow them to
operate the mouse.
sionalization by specifying it using the mouse.
Messages will appear at the bottom of the Work
window area as shown right, so follow them to
operate the mouse.
Click the [Edit] button again to exit the edit mode.
• Switch to pitch display screen, and right-click on
desired position in the screen while holding down
[CTRL] key. The Z-axis coordinates at that posi-
tion (distance from VIVID 9i) will appear.
[CTRL] key. The Z-axis coordinates at that posi-
tion (distance from VIVID 9i) will appear.
To specify distance manually and perform mea-
surement, this value must be used.