Konica Minolta VI-300 用户手册
104
Chapter
2
File
Menu
Menu
700
File – Import – Digitizer – One Scan (When VIVID 700 is Selected)
• If the color and range images are not scanned at
the same time, clicking the [Read] button will
capture a color image and display it.
capture a color image and display it.
• To restart scan, repeat steps 2 to 4.
5
Click the [Scan] button.
Scan will start, and both color and range im-
ages will be displayed.
ages will be displayed.
6
Click the [Convert] button.
The [File-Import-Digitizer-One Scan-Convert]
dialog box will appear.
dialog box will appear.
7
Enter the desired element name, and
set parameters.
• Select the desired rate from “1/1”, “1/4”, “1/9”,
“1/16” and “No polygon” by selecting from the
[Reduction Rate] pull-down menu.
[Reduction Rate] pull-down menu.
• If you want to generate points to fill in holes caused
by missing data, set the [File Holes] setting to “On”.
• The [Remove] pull-down menu lets you select
which points to remove from the imported data.
You can set this to any of the following: “None”,
“Boundary(B.)”, “5deg. & B.”, “10deg. & B.”,
“15deg. & B.”, or “20deg. & B.”
“15deg. & B.”, or “20deg. & B.”
• If you want to filter the imported data, select the ap-
propriate parameter from the [Filter] pull-down menu.
• To save the raw scan data (.cam) when importing
data, check the [Save camera data] checkbox.
Note
The element name must consist of up to 31 alphanu-
meric characters.
meric characters.
8
Click the [OK] button.
The scanned image will be displayed. The
names of the imported elements will also
appear in the element list, indicating that the
elements have been selected (highlighted).
names of the imported elements will also
appear in the element list, indicating that the
elements have been selected (highlighted).
• The loaded data will be ready to be displayed in
all windows. It will be displayed in the active
window and the windows for which all the ele-
ments are set to be displayed.
window and the windows for which all the ele-
ments are set to be displayed.
• When the data is loaded for the first time after
the software is started, it will be fully framed in
all the windows including those that are hidden
automatically.
all the windows including those that are hidden
automatically.
• If the [Save camera data] checkbox was checked
at step 7, the [Remote-Save] dialog box will ap-
pear
pear
q
Enter the desired file name.
w
Click the [Save] button.
Note
The file name must consist of alphanumeric characters
only.
only.