Konica Minolta VI-300 用户手册
185
Chapter
2
Build
Menu
Menu
9i
910
900
700
300
910
900
700
300
Build – Registration – Fine – Elements
Performing Fine Registration of Elements
This command is used to perform registration of the selected elements.
Operating Procedure
1
From the element list, select the desired
elements.
M
emo
It is possible to select two or more elements by clicking
them while holding down the [Shift] or [Ctrl] key.
them while holding down the [Shift] or [Ctrl] key.
2
From the [Build] menu, select [Registra-
tion], [Fine] and then click [Elements].
The [Build-Registration-Fine-Elements] dialog
box will appear.
box will appear.
• The selected element will be ready to be dis-
played in all windows. It will be displayed if
it is not displayed in the active window or the
windows for which all the elements are set to be
displayed.
it is not displayed in the active window or the
windows for which all the elements are set to be
displayed.
3
Set the base element, and then click
the [OK] button.
The program executes fine registration for the
selected elements, and displays a dialog ask-
ing whether results are satisfactory.
selected elements, and displays a dialog ask-
ing whether results are satisfactory.
4
Click the [OK] button.
The menu will be exited.
• To continue fine registration processing, click the
[Repeat] button.
M
emo
The [Error Average] and [Sigma] values are indicators of
the correctness of the registration (the alignment).
In general, the closer to zero they are, the more accurate
alignment is.
the correctness of the registration (the alignment).
In general, the closer to zero they are, the more accurate
alignment is.