Universal Remote Control WR7 用户手册
Page 14
Auto-Search Method
The Auto-Search Method is a way you can
scan through all of the codes in the table to
find the right code for your component.
scan through all of the codes in the table to
find the right code for your component.
STEP 1:
Manually or using your old remote,
turn on the component you want to pro-
gram—for example, to program your TV,
turn on your TV set.
gram—for example, to program your TV,
turn on your TV set.
STEP 2:
On the WR7, press the Component
button that you want to program (in this
case the button that says TV) and the
SELECT [SEL] button at the same time. Hold
down both buttons for two seconds until the
TV Component button light turns on. This sig-
nals that you are in programming mode.
case the button that says TV) and the
SELECT [SEL] button at the same time. Hold
down both buttons for two seconds until the
TV Component button light turns on. This sig-
nals that you are in programming mode.
IMPORTANT:
You have 30 seconds to per-
form the next step while you are in program-
ming mode. If you do not press a button
within 30 seconds, the component LED light
will turn off. The remote will exit the pro-
gramming mode and you will have to start
over.
ming mode. If you do not press a button
within 30 seconds, the component LED light
will turn off. The remote will exit the pro-
gramming mode and you will have to start
over.
DOWN
ARROW
UP
ARROW