Directed Electronics 2.2 用户手册
35
© 2008 Directed Electronics. All rights reserved.
Zone
Description
Dealer installed options
1
Trunk Pin
2
Instant trigger: a heavier impact
detected by the shock sensor
detected by the shock sensor
3
Door switch trigger
4
Instant trigger: For optional
sensors
sensors
5
Ignition trigger
6
Hood Pin
➤
Interpreting zone diagnostics
Warn Away responses are not reported by arming or disarming diag-
nostics. If you receive a Bypass notification when arming or a Tamper
Alert notification when disarming, look at the LED.
nostics. If you receive a Bypass notification when arming or a Tamper
Alert notification when disarming, look at the LED.
Active or triggered zones will be indicated by a pattern of blinks by
the LED.
the LED.
For example:
If zone 3 was active or triggered, the LED will blink three
times with a two-second pause. Then it will blink three times again, and
repeat until the ignition is turned on.
repeat until the ignition is turned on.
➤
Nuisance prevention® circuitry
Your system has Directed’s Nuisance Prevention® Circuitry (NPC). It
prevents annoying repetitive trigger sequences due to faulty door pin
switches or environmental conditions such as thunder, jackhammers,
airport noise, etc.
prevents annoying repetitive trigger sequences due to faulty door pin
switches or environmental conditions such as thunder, jackhammers,
airport noise, etc.
For example:
If the alarm triggers three times within a 60-minute period
and each time the same sensor or switch triggers the alarm, NPC will