Philips SLV4200/12 用户手册

Frequently asked questions

15

Easylink feature does not work.

• Check if the TV and VCR support 

Easylink. 

• Check if you used full-wired SCART 

cables.

Black and white image with S-VHS VCR.

• (Super Video Home System Video/

Cassette/Recorder)

• Check if the SCART connector of the 

S-VHS VCR gives signal in CVBS. 

(Composite Video Broadcast Signal). 

See its user manual.

How can I find the IR sensor on the video 

source?

• The blaster light needs to be 

positioned precisely on the IR sensor 

of the video source. Some equipments 

have the letters IR at the front 

indicating the location of the IR sensor. 

In case there is no indication the 

position can be found by moving the 

blaster light slowly over the front of 

the video source while a 2nd person 

operates the remote control at the 

location of TV2. At least make sure 

that the remote control is out of range 

of the video source. When the video 

source starts to react the IR sensor 

location is found. Mount the blaster 

light on this location at the front of the 

video source. 

• Another possibility is to move the 

remote control over the front of the 

video source while operating it. Once 

the video source starts to react the 

location of the IR sensor is found. This 

method is less accurate and does not 

work for each remote control model. 

• Also consult the documentation of 

your video source to locate the IR 

sensor.

How can I watch a different channel on 

TV1 and TV2 simultaneously?

• Watching two different channels is 

only possible if you use two tuners. 

For example TV1 uses its internal 

tuner and TV2 uses the tuner of the 

VCR. For switching channels on TV2 

you switch then between the channels 

stored in the VCR. Note that this is 

not possible when you have a digital 

cable. 

• Connect your antenna cable to both 

your TV1 and your VCR. 

• Search for the TV channels on your 

VCR and store them in your VCR. 

• Connect the transmitter (A) to the 

output of the VCR. 

• Connect the receiver (B) to the input 

of TV2. 

• To switch TV channels on TV2 switch 

the channel on your VCR.