Motorola HDT100 用户手册
35
Connecting your A/V Receiver, VCR and High Definition TV
1
1
Connect the component video cable supplied with the HDT100 to the
Y, Pb, and Pr connectors on your TV and HDT100.
Y, Pb, and Pr connectors on your TV and HDT100.
2
Connect an optical digital audio cable to the
OPTICAL
connector on
the HDT100 and the
OPTICAL
input connector on the A/V receiver.
3
Connect a video cable to the
VIDEO
connector on the HDT100 and
the
CABLE
/
TV VIDEO
connector on the A/V receiver.
If your equipment supports it, S-Video connections may be used in
place of the standard composite video connections. In most cases,
S-Video offers a higher level of standard definition video quality than
composite video.
place of the standard composite video connections. In most cases,
S-Video offers a higher level of standard definition video quality than
composite video.
4
Connect a stereo audio cable to the
VCR AUDIO OUT R
and
L
connectors on the A/V receiver and the
INPUT AUDIO R
and
L
connectors on the stereo VCR.
When using the Digital Audio output (
OPTICAL
or
SPDIF
), the left / right
baseband audio connections to the A/V receiver are not needed.
5
Connect a stereo audio cable to the
OUTPUT AUDIO OUT R
and
L
connectors on the stereo VCR and the
VCR AUDIO IN R
and
L
connectors on the A/V receiver.
6
Connect a video cable to the
INPUT VIDEO
connector on the stereo
VCR and the
VIDEO VCR OUT
connector on the A/V receiver.
7
Connect a video cable to the
OUTPUT VIDEO
connector on the stereo
VCR and the
VIDEO VCR IN
connector on the A/V receiver.
8
Connect a video cable to the
INPUT VIDEO
connector on the stereo TV
and the
TV
/
MONITOR OUTPUT VIDEO
connector on the A/V receiver.
To switch between viewing input from your VCR and input from your
HDT100, change your TV’s video inputs.
HDT100, change your TV’s video inputs.