ResMed S8 AutoScore II 用户手册

5

Using the S8 Series II

Press 

 or 

 until you see the setting that you require. 

Press 

 to apply.

You can use the S8 Series II mask-fitting feature to help you fit your mask properly. This 
feature delivers air pressure for a three-minute period, prior to starting treatment, 
during which you can check and adjust your mask fit to minimise leaks. 
Note: Make sure that the mask setting on the MASK screen is the same as the mask 
you are using.

Fit your mask as described in the mask user instructions. 

With the RAMP or SETTLING screens displayed, hold down 

 for at least 

three seconds until air pressure delivery starts. 
Your device will ramp to the mask-fit pressure and will remain at this pressure 
for three minutes. 
The following displays on the LCD screen indicating that the mask-fitting feature 
is operating, where: ***** is an excellent fit;****- is a very good fit; ***-- is a 
good fit; while **---, *---- and ----- each require you to adjust your mask.

Adjust your mask, mask cushion and headgear until you have a secure and 
comfortable fit. 
After three minutes, the pressure reverts to the set pressure and treatment will 
begin. If you do not wish to wait three minutes, hold down 

 for at least 

three seconds to start treatment immediately. 
If you press 

 for less than three seconds, the unit will return to standby 

mode (the RAMP or SETTLING screen).

Make sure the power is on. 

The product name is displayed briefly on the screen, then the standby screen 
displays RAMP (or SETTLING). The key and LCD backlights also turn on.

Lie down and arrange the air tubing so that it is free to move if you turn in your 
sleep.

Do not leave long lengths of air tubing around the top of your bed. They could 
twist around your head or neck while you are sleeping.

Alter the ramp or settling time if required.  

 MASK FIT:        *****       

 excelnt