ResMed S8 Series II 用户手册
6
4
To start treatment, press
.
5
Fit your mask as described in the mask user instructions.
!
WARNING
A mask should not be used unless the S8 Series II device is powered and
operating properly.
operating properly.
Stopping Treatment
To stop treatment at any time, remove your mask and press
.
If your clinician has enabled SmartStart, simply remove your mask and treatment will
end.
end.
Changing the Settings on your S8 II Device
You can change settings (such as Ramp Time, EPR Level) on S8 II devices by using the
keypad and LCD. When the device is in standby mode you can display a series of
screens (a menu) on the LCD screen in order to view and change the settings for a
particular function.
keypad and LCD. When the device is in standby mode you can display a series of
screens (a menu) on the LCD screen in order to view and change the settings for a
particular function.
The Standard Menu
Your clinician will have enabled a standard menu on your S8 Series II device. The figure
below shows the standard menu in each mode.
To enter the standard menu from the standby (RAMP or SETTLING) screen,
press
below shows the standard menu in each mode.
To enter the standard menu from the standby (RAMP or SETTLING) screen,
press
.
Note: The AutoSet menu is available on the S8 AutoSet Spirit II only.
S8 CLASSIC
RAMP: 10min
menu
menu
S8 CLASSIC
WELCOME
>>>>>>
>>>>>>
S8 CLASSIC
SETTLING: 10min
menu
menu
S8 CLASSIC
WELCOME
>>>>>>
>>>>>>
EPR LEVEL: 1
change exit
CPAP
AUTOSET
MASK: ULTRA
change exit
exit
SW: SX4800100
USED HRS: 08000
exit
USAGE: 1000/1068
exit
MASK: ULTRA
change exit
exit
SW: SX4800100
USED HRS: 08000
exit
USAGE: 1000/1068
exit
EPR LEVEL: 1
change exit
* Only displayed if access set by clinician.
*
*