ResMed S8 Elite II 用户手册
3
Using the S8 Series II
En
gli
sh
Using the S8 Series II
Setting Up
1
Connect the power cord to the socket at the rear of the S8 Series II device.
2
Plug the other end of the power cord into the power outlet.
3
Connect one end of the air tubing firmly onto the air outlet.
4
Connect the assembled mask system to the free end of air tubing.
For information on assembling your mask, see your mask manual.
For information on assembling your mask, see your mask manual.
!
WARNING
•
Make sure the power cord and plug are in good condition and the
equipment is not damaged.
equipment is not damaged.
•
Only ResMed air tubing should be used with the device. A different type
of air tubing may alter the pressure you actually receive, reducing the
effectiveness of your treatment.
of air tubing may alter the pressure you actually receive, reducing the
effectiveness of your treatment.
•
Blocking the hose and/or air inlet of the device while in operation could
lead to overheating of the device.
lead to overheating of the device.
!
CAUTION
•
Be careful not to place the device where it can be bumped or where
someone is likely to trip over the power cord.
someone is likely to trip over the power cord.
•
If you put the device on the floor, make sure the area is free from dust
and clear of bedding, clothes or other objects that could block the air
inlet.
and clear of bedding, clothes or other objects that could block the air
inlet.
•
Make sure the area around the device is dry and clean.
1
2
3
4