Panasonic AG-1340P 用户手册

Before requesting service, check the following
points again.

On screen display
messages are displayed.

The error message is indicated in brackets
[

].

[PLEASE PUT IN A VIDEO CASSETTE.]

–

[REC (REC/OTR)] or [TIMER (TIMER
REC)] has been pressed without a video
cassette inserted.
Insert a video cassette with an intact
erasure prevention tab.

[PLEASE STOP THE TAPE.]

–

[CHANNEL SET] has been selected
during playback. Stop the tape.

[PLEASE SET THE CLOCK.]

–

[TIMER (TIMER REC)] or [PROG./
CHECK] has been pressed when the
clock is not set.
Set the clock.

[PLEASE USE A CASSETTE WITH TAB.]

–

[REC (REC/OTR)] or [TIMER (TIMER
REC)] has been pressed without a video
cassette with an intact erasure
prevention tab.
Use a video cassette with an intact
erasure prevention tab.

[NO TIMER RECORDING HAS BEEN SET.]

–

[TIMER (TIMER REC)] has been
pressed with no timer programs.
Set timer recording.

[VCR IS IN THE TIMER STANDBY MODE.]

–

[POWER  Í/I (VCR Í)] has been
pressed during the timer standby mode.
Press [TIMER (TIMER REC)] to release
the VCR from the timer standby mode.

This VCR has a self-diagnosis and display
function. If the VCR detects trouble during
installation or during use, the following
indications automatically appear in the VCR
display. Indications are in the form of a single
English letter plus two numbers, such as [H01].

INDICATION: H∑∑, F∑∑
CAUSE:

Some trouble has occurred.
(Numbers after H and F
differ according to the status
of the VCR.)

REMEDY:

Consult your dealer for
further advice.

The symptom description is indicated in
brackets [

].

[The VCR display is not illuminated.]

–

The AC power cord has not been
connected.
Connect the AC power cord to the main
AC power.

[The VCR display is illuminated but the VCR
will not operate.]

–

The VCR is in the timer mode.
Press [TIMER (TIMER REC)] to operate
the VCR manually.

–

Safety devices are operating.
Disconnect the AC power cord and wait
for 1 minute. Reconnect the mains
supply and check functions.

[An unknown language appears on the TV
screen.]

–

The language setting has been set to an
unknown language.
Select the desired language.
See page 16.