Philips SVB106 用户手册
2
VCR 1 will play your tape. Insert a prerecorded tape in VCR
1. If the tape does not have a record tab, playback begins. If this hap-
pens, press the STOP/EJECT button on VCR 1 once.
1. If the tape does not have a record tab, playback begins. If this hap-
pens, press the STOP/EJECT button on VCR 1 once.
1
Make the connections shown above.
Rerecording (Tape Duplication) 33
3
VCR 2 will record your tape. Insert a blank tape in VCR 2.
Make sure the record tab is intact (details are on page five). Make sure
the VCR 2 power is on and VCR 2 is in VCR position. (The VCR/TV
light will appear. If it does not, press the VCR/TV button once.)
Make sure the record tab is intact (details are on page five). Make sure
the VCR 2 power is on and VCR 2 is in VCR position. (The VCR/TV
light will appear. If it does not, press the VCR/TV button once.)
4
Turn on the TV and set it to channel 3 or 4, whichever
channel the CH3/CH4 switch on VCR 2 is set to.
channel the CH3/CH4 switch on VCR 2 is set to.
5
Point the remote control at VCR 2. Press the Number but-
tons 0, 0, 1 or 0, 0, 2. (See Helpful Hints at right.)
tons 0, 0, 1 or 0, 0, 2. (See Helpful Hints at right.)
6
Point the remote control at VCR 2. Use the SPEED button
to select SP or SLP.
to select SP or SLP.
7
Press the PLAY button on VCR 1 and the REC(ord)/OTR
button on VCR 2 at the same time.
button on VCR 2 at the same time.
8
To stop recording, press the STOP/EJECT button on VCR 2
once, then stop the tape on VCR 1.
once, then stop the tape on VCR 1.
• If you use the AUDIO and VIDEO IN
jacks on the back of VCR 2, press
Number buttons 0, 0, 1 at step 5.
LineIn Rear (L1) will appear on the
screen.
Number buttons 0, 0, 1 at step 5.
LineIn Rear (L1) will appear on the
screen.
• If you use the AUDIO and VIDEO In
jacks on the front of VCR 2, press
Number buttons 0, 0, 2 at step 5.
LineIn Front (L2) will appear on the
screen.
Number buttons 0, 0, 2 at step 5.
LineIn Front (L2) will appear on the
screen.
• Unauthorized recording of copyright-
ed television programs, video tapes,
or other materials may infringe on
the rights of copyright owners and
violate copyright laws.
or other materials may infringe on
the rights of copyright owners and
violate copyright laws.
• If a program has copyright protection,
it may not record clearly.
• Audio and video cables are not sup-
plied.
• The illustration uses two VCRs just
like yours. Different VCRs may oper-
ate differently.
ate differently.
• When the VCR is in Line Input mode
(L1 or L2), the screen will be blue.
Helpful Hints
VCR 1
Playing VCR
VCR 2 - Recording VCR
1. Audio cables from AUDIO OUT Jacks
of VCR 1 to AUDIO IN Jacks of VCR 2
of VCR 1 to AUDIO IN Jacks of VCR 2
2. Video cable from VIDEO OUT Jack of
VCR 1 to VIDEO IN Jack of VCR 2
VCR 1 to VIDEO IN Jack of VCR 2
3. RF coaxial cable
from the OUT jack of
VCR 2 to the TV’s
ANTENNA IN Jack