Magnavox MVR650MG/17 用户手册
32 Rerecording (Tape Duplication)
• If you connected another VCR to
the AUDIO/VIDEO IN jacks on the
back of VCR 2, press 0, 0, 1 at
step 5. L1 will appear on the TV.
back of VCR 2, press 0, 0, 1 at
step 5. L1 will appear on the TV.
• If you connected another VCR to
the AUDIO/VIDEO In jacks on
front of VCR 2, press 0, 0, 2 at
step 5. L2 will appear on the TV.
front of VCR 2, press 0, 0, 2 at
step 5. L2 will appear on the TV.
• When the VCR is set to L1 or L2,
the screen is blue.
• Unauthorized recording of copy-
righted TV programs, video tapes,
or other materials may infringe on
the rights of copyright owners and
violate copyright laws. A copy-pro-
tected program will not record
clearly.
or other materials may infringe on
the rights of copyright owners and
violate copyright laws. A copy-pro-
tected program will not record
clearly.
• Audio and video cables are not
supplied.
• If you have the MVR440MG/17
or MVR450MG/17, connect one
audio cable to the AUDIO OUT
jack on VCR1 and to the AUDIO
IN jack on VCR2.
audio cable to the AUDIO OUT
jack on VCR1 and to the AUDIO
IN jack on VCR2.
Helpful Hints
ANT
AUDIO
VIDEO
IN
OUT
OUT
IN
OUT
L
R
IN
ANT
AUDIO
VIDEO
IN
OUT
OUT
IN
OUT
L
R
IN
VCR 1
Playing VCR
VCR 2 Recording VCR
1. Audio cables from AUDIO OUT Jacks
of VCR 1 to AUDIO IN Jacks of VCR 2
of VCR 1 to AUDIO IN Jacks of VCR 2
2.Video cable from VIDEO OUT Jack of VCR
1 to VIDEO IN Jack of VCR 2
1 to VIDEO IN Jack of VCR 2
3. RF coaxial cable
from the OUT
jack of VCR 2 to
the TV’s ANTEN-
NA IN Jack
1
Make the connections shown above.
2
VCR 1 will play your tape. Insert a prerecorded tape
in VCR 1. If the tape does not have a record tab, play
begins. If this happens, press STOP/EJECT on VCR 1 once.
in VCR 1. If the tape does not have a record tab, play
begins. If this happens, press STOP/EJECT on VCR 1 once.
3
VCR 2 will record your tape. Insert a blank tape in
VCR 2. Make sure the record tab is intact (see page five).
Make sure VCR 2 is on and in VCR position. (The green
VCR/TV light will appear. If it does not, press VCR/TV once.)
VCR 2. Make sure the record tab is intact (see page five).
Make sure VCR 2 is on and in VCR position. (The green
VCR/TV light will appear. If it does not, press VCR/TV once.)
4
Turn on the TV and set it to channel 3 or 4 (the RF
output channel of VCR 2). See page seven.
output channel of VCR 2). See page seven.
5
Point the remote at VCR 2. Press 0, 0, 1 or 0, 0, 2. (See
Helpful Hints at right.)
Helpful Hints at right.)
6
Point the remote at VCR 2. Use SPEED to select SP
or SLP.
or SLP.
7
Press PLAY on VCR 1 and RECORD on VCR 2 at the
same time.
same time.
8
To stop recording, press STOP/EJECT on VCR 2
once, then stop the tape on VCR 1.
once, then stop the tape on VCR 1.
These instructions show you how to copy tapes using two
MVR650MG/17 VCRs. Different VCRs may operate differently.
MVR650MG/17 VCRs. Different VCRs may operate differently.