Magnavox MVR650MG/17 用户手册

There are two ways to connect your Cable Box/Satellite to the VCR.With this connection:

●

You may view any channel. Select channels at the Cable Box/Satellite, not at the VCR.

●

You may not view a channel other than the one you are recording.

●

Do not set up channels at the VCR.

●

Program a timer recording for one channel at a time. Set the TV and the VCR to the Cable Box/Satellite

output channel (03 or 04); set the RF output channel of the VCR to the same channel (see page seven). Set
your Cable Box/Satellite to the channel you want to record.When you enter the channel you want to
record in a timer recording, enter 03 or 04 (the Cable Box/Satellite output channel). (This is step 7 on page
28.) Leave the Cable Box/Satellite on for a timer recording.

75   

ANT /

CABLE

TV’s

ANTENNA IN

Jack

Cable Box/Satellite

VCR

Connect a Cable TV or Satellite signal to the IN Jack on the
Cable Box/Satellite.

Use an RF coaxial cable (supplied) to connect the OUT Jack
on the Cable Box/Satellite to the ANT(enna) IN Jack on the
VCR.

Use a second RF coaxial cable to connect the OUT Jack on
the VCR  to  the TV’s ANTENNA IN jack.

With the VCR on and in VCR position (the green VCR/TV
light will appear on the display panel), use CH 

Set the VCR’s RF output channel to 3 or 4. The default
setting is channel 3. See page seven. Set the TV to the
same channel.

Cable TV  or

Satellite

Signal

RF coaxial

cable

RF coaxial

cable