Omron Healthcare HBF-514 用户手册

26

The CAL symbol blinks on the display, then the display 
changes to 0.0 lb.
Wait until 0.0 lb appears on the display.

• If you step onto the monitor before 0.0 lb appears on the 

display, an error message “Err” will appear.

• This monitor can be set to either the US or Metric System. 

Personal Profile and memory will be displayed by selected 
system. To change the US/Metric mode:

1)

Keep the 

DOWN/MEMORY button pressed until “lb” 

and “kg” blink on the display.

2)

Press the 

DOWN/MEMORY button to select the mode, “lb” or “kg”.

This will automatically change “cm” and 

“feet/inch” under height setting

.

3)

Press the SET button to confirm the change.

NOTE: Do not take out the display unit until 0.0 lb appears on 

the display.

Place both middle fingers 
along the dents of the grip 
electrodes.

Hold the inner grip 
electrodes firmly with your 
thumb and index finger.

Press your palms firmly on the grip 
electrodes.

Hold the outer grip 
electrodes with your ring 
finger and small finger.