Magnavox MBP110V/F7 用户手册
26
EN
PLAYBACK
You can adjust the picture quality.
1
During playback, press [MODE] repeatedly
until “
until “
“ appears.
2
Use [K / L] to select your desired item, then
use [0 / 1] to adjust the setting.
use [0 / 1] to adjust the setting.
■ Black level
You can adjust the black level setting to make the black
parts of the pictures as bright as you prefer. You can select
“On” or “Off”.
parts of the pictures as bright as you prefer. You can select
“On” or “Off”.
■ Noise reduction (DVD-video only)
Reduces the noise of the playback picture.
3
Press [RETURN] to exit.
You can enjoy stereophonic virtual space through your
existing 2 channel stereo system.
existing 2 channel stereo system.
1
During playback, press [MODE] repeatedly
until “
until “
” appears.
2
Use [K / L] to select your desired setting.
3
Press [RETURN] to exit.
Some BD-videos have the PIP function which enables you
to display the secondary video in the primary video. You
can call up the secondary video by pressing [MODE]
whenever the scene contains the secondary video.
Refer also to the “Note” on the next page.
to display the secondary video in the primary video. You
can call up the secondary video by pressing [MODE]
whenever the scene contains the secondary video.
Refer also to the “Note” on the next page.
1
During playback, press [MODE] repeatedly
until the PIP function appears.
until the PIP function appears.
2
Use [K / L] to select the secondary video you
want.
want.
• The secondary video will be displayed and the
secondary audio will be output.
• Use [0 / 1] to switch between current setting and
“Off”.
3
Press [RETURN] or [MODE] to remove the PIP
information.
information.
Adjusting the Picture
“On” : Makes the dark parts brighter.
“Off” : Shows the original picture as recorded.
“Off” : Shows the original picture as recorded.
“Off” : Shows the original picture as recorded.
“1”
“1”
: Executes 3D noise reduction which detects and
deletes the noise by comparing each picture
frame.
frame.
“2”
: Executes MPEG noise reduction which reduces
the block noise and mosquito noise on the
movie subtitle.
movie subtitle.
“3”
: Executes both MPEG noise reduction and 3D
noise reduction.
Note
• The setting will remain the same even if the unit is
turned to the standby mode.
• For the picture output from HDMI OUT jack, “Black
Level” is not effective.
• You cannot adjust the setting during rapid playback.
Black Level
Noise Reduction
On
Off
e.g.) DVD-video
Virtual Surround
“Off” : No surround effect
“1”
“1”
: Natural surround effect
“2”
: Stronger surround effect
Note
• Set the virtual surround setting to “Off” or lower the
volume if the sound is distorted.
• Virtual surround does not function during rapid
playback.
• For the virtual surround, audio signal will always be
2-channel LPCM.
PIP (BONUSVIEW) Setting
Off
primary
video
secondary
video
E8M00UD_EN.book Page 26 Thursday, July 15, 2010 10:01 AM