Magnavox MBP110V/F7 用户手册

EN

Use [K / L] to select your desired audio stream 
channel.

• For audio CD, you can select following options.

There are 2 options for the “BD Audio Mode” setting; either 
by setting the output to the secondary and interactive 
audio accompanied by the primary audio or by setting 
only the primary audio. Depending on the setting of the 
mode, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, 
DTS, or DTS-HD output changes between multi LPCM and 
bitstream.

Use [K / L] to select your desired setting.

“Mix Audio Output”:
If it is available, BD-video’s secondary and interactive 
audio will be output with the primary audio.

• The secondary audio is the audio for the secondary 

video (Director’s comment etc.) and the interactive 
audio is the audio for the interactive application 
(Button click sounds etc.).

“HD Audio Output”:
Only the primary audio will be output. Set this mode in 
order to output , Dolby Digital Plus, Dolby TrueHD, or 
DTS-HD audio of BD through HDMI connection.

• You can also set “BD Audio Mode” from the setup 

menu. Refer to page 31.

• Refer to “Audio signals output from HDMI OUT jack” 

on page 35 and “Audio signals output from DIGITAL 
AUDIO OUT (COAXIAL) jack” on page 36  for how BD 
Audio will be output.

“Stereo” : Both right and left channels are active 

(stereo).

: Only left channel is active.

: Only right channel is active.

• The secondary audio will not be output when the 

secondary video is not displayed or when “BD Audio 
Mode” is set to “HD Audio Output”. (For some BDs, 
secondary audio will be output even when 
secondary video is off.)

• The sound mode cannot be changed during 

playback of discs not recorded in multiple audio.

• Some discs allow changing the audio language 

setting on the disc menu. (Operation varies 
depending on the discs. Refer to the manual 
accompanying the disc.)

• [AUDIO] may not work on some discs with multiple 

audio streams or channels (e.g. DVDs that allow 
changing audio setting on the disc menu).

• If you select a language that has a 3-letter-language 

code, the code will be displayed every time you 
change the audio language setting. If you select any 
other languages, “---” will be displayed instead. 
(Refer to page 44.)

• Audio Language selection cannot be made during 

rapid playback. (Refer to page 25.)

• If 4-digit-language code appears in the audio menu, 

refer to page 44.

• If the disc has no audio language, “Not Available” will 

be displayed on the TV screen.

• For DTS-CD (5.1 music disc), selecting audio streams 

or channels is not available.

e.g.) DVD-video

• In “Mix Audio Output” mode, if there is no secondary 

and interactive audio, the audio will be output as 
“HD Audio Output” mode.

E8M00UD_EN.book  Page 29  Thursday, July 15, 2010  10:01 AM