Magnavox MBP110V/F7 用户手册

EN

If the unit does not perform properly when operated as instructed in this manual, check the unit, consulting the 
following checklist.

No power.

- Check if the AC cord is properly connected.
- Make sure the power is turned on.
- Unplug the AC cord once, and wait for 5-10 seconds and then plug it in again.

No sound or picture.

- Check if the connected TV is turned on.
- Check if the connections are made securely and correctly.
- Check whether the connected TV or another device supports HDCP. (This unit 

will not output a video signal unless the other device supports HDCP.)

- Check whether the output format of this unit (HDMI FORMAT) matches the 

supported input format of another connected device.

No audio / video signal on the 
display device via HDMI cable.

- If the unit is connected to the unauthorized display device with an HDMI 

cable, the audio / video signal may not be output.

- Perform an HDMI cable hotplug, wherein you disconnect the HDMI cable 

from the TV and this unit and then reconnect it to both the devices while they 
are powered on.

- Ensure that your HDMI cable is certified.

Distorted picture.

- Sometimes a small amount of picture distortion may appear.

This is not a malfunction.

- Interference signal may be received. Change the position and direction of the 

unit.

- Connect this unit directly to the TV. If the RCA audio / video cables are 

connected to a VCR, pictures may be distorted due to the copy right 
protection system.

Completely distorted picture or 
black / white picture with BD / 
DVD.

- Make sure the disc is compatible with this unit.

No sound or distorted sound.

- Adjust the volume.
- Check if speakers are connected correctly.
- Check the HDMI connections.
- Check the settings in “Audio” menu.

Picture freezes momentarily 
during playback.

- Check the disc for fingerprints / scratches and clean with a soft cloth wiping 

from center to edge.

- Clean  the  disc.

Disc cannot be played back.

- Clean the disc.
- Ensure the disc label is facing up.
- Check if the disc is defective by trying another disc.
- Cancel the ratings control or change the control level.
- Insert a disc that has been played back on this unit.

SD Memory Card cannot be 
read.

- The format of the card does not match the format accepted by this unit or the 

card is not compatible. (Refer to page 15.)

No return to start-up screen 
when disc is removed.

- Reset this unit by turning it off, then on again.

The unit does not respond to 
the remote control.

- Aim the remote control directly at infrared sensor window on the front panel.
- Reduce the distance to infrared sensor window.
- Replace the batteries in the remote control.
- Re-insert the batteries with their polarities (+ / - signs) as indicated.

Buttons do not work or the unit 
stops responding.

- To completely reset the unit, press and hold [

Q STANDBY/ON] on the front 

panel for 10 seconds to shut down the unit or unplug the AC cord from the 
AC outlet for 5-10 seconds.

The unit does not respond to 
some operating commands 
during playback.

- Operations may not be permitted by the disc.

Refer to the instructions of the disc.

The unit cannot read BD / DVD/ 
CD.

- Condensation? (Let sit 1 or 2 hours)
- You are attempting to play back a disc other than one with one of the Logos 

on page 15.

- Wipe any dirt or smudges off the disc or replace the disc.

E8M00UD_EN.book  Page 41  Thursday, July 15, 2010  10:01 AM