Spectralink BPX100 用户手册

下载
页码 50
SpectraLink Corporation 
NetLink e340/h340/i640 Wireless Telephones and Accessories User Guide 
Part Number: 72-1004-01-H.doc 
Page 44 
Feature Access 
Shortcut keys  Press the 
FCN
 key to scroll through the feature list. Press a shortcut 
key per the table below to activate system features. 
First screen  1 Trans/Conf 
2 Cancel 
3 Message 
4 Redial 
Second screen  5 Mute/Unmute 
6 Superkey/Hold 
7 [may be locally programmed] 
8 [may be locally programmed] 
Third screen  9 
[may be locally programmed] 
[may be locally programmed] 
[may be locally programmed] 
Fourth screen, etc.
  [may be locally programmed] 
*(OAI) 
0 (OAI) 
# (OAI) 
  See FCN Display above for explanation of OAI position. 
 
Hold/Superkey  The Hold feature is assigned to softkey D. To place a call on hold, 
press the softkey on the far right.  
The superkey and hold features swap places depending on the 
mode of the handset. When in a call, the superkey is menu item 
FCN
 
6 
and the 
Hold
 feature is available through softkey Dddd. When 
not in a call, the superkey (
Skey
) is available as softkey Dddd and 
the Hold feature is displayed as number 6 on the Feature list. 
Hot Desking  The Mitel PBX allows configuration of a hot desking feature which 
allows a handset to register with the PBX as a different extension. If 
so configured, a 
HDsk
 softkey in position Cccc will appear on the 
handset in the active (on-hook) mode.  
To change the extension on the handset and log in as a different 
user, press the 
HDsk
 softkey. When the hot desk softkey is pressed, 
the PBX displays 
No user logged in
 and the current extension. Press 
the Login softkey (
Logi
) and enter the new extension. Press the 
OK
 
softkey. The display prompts for a PIN number. Enter the PIN and 
press the 
OK
 softkey. The handset will display 
Get button defs
 as it 
checks in with the PBX. Once registration is complete, the new 
extension will display and the handset will be in standby mode. 
Paging  The handset does not incorporate speakerphone capabilities and 
therefore receiving a page is not supported. The user may send a 
page if this feature has been programmed. 
 
                                                                          
1
 Note: There may be more features programmed than there are available shortcut keys. In this situation, the 
feature may be activated by using the Up, Down, Select buttons on the side of the Wireless Telephone.