Sanyo SCP-8400 用户手册
130
Section 2H: Using Your Phone’s Voice Services
Using Voice-Activated Dialing
In addition to Sprint PCS Voice Command (see page 242), you
can use a voice dial tag to automatically dial a phone number
in your Contacts. (A voice dial tag is a command you record
and use to place calls without using the keypad.) Your phone
can store up to 30 voice dial tags.
can use a voice dial tag to automatically dial a phone number
in your Contacts. (A voice dial tag is a command you record
and use to place calls without using the keypad.) Your phone
can store up to 30 voice dial tags.
Note:
Please set the Voice Prompt feature (see page 52) to on before using
the Voice-Activated Dialing so that you can hear the voice instruction from
the phone. The default setting is off.
the phone. The default setting is off.
Making a Call Using Voice-Activated Dialing
1.
Press and hold
,
, or
.
2.
Follow the voice prompts and recite the entry’s voice tag
into your phone’s microphone.
into your phone’s microphone.
Note:
To use the Voice Dial function, you must have stored Voice Tag entries.
(See “Programming Voice Dial Tags”below.)
Tip:
You can also make a call using voice-activated dialing with the phone
closed. Press and hold the Side Call key (
), and follow the voice prompts.
Programming Voice Tags
To program a voice tag:
1.
From standby mode, press Contacts (right softkey).
2.
Select a contact and press
.
3.
Select a phone number, and then press Options (right
softkey) > SetVoice Tag > Add.
softkey) > SetVoice Tag > Add.
4.
After you are prompted to say the name you wish to
program, wait for the beep and then say the name into
your phone’s microphone.
program, wait for the beep and then say the name into
your phone’s microphone.