Siemens C450 IP 用户手册

Gigaset C450 IP / IM-Nord EN / A31008-M1713-R201-3-7643 / starting.fm / 01.03.2007

Ve

rs

ion 4,

 16

.09.

2005

Depending on the VoIP provider, the fol-

lowing information will be requested in 

sequence:

If this is required by your pro-

vider, enter name and press 

.

Enter name and press 

.

Enter password and press 

.

If you have made all the necessary entries, 

the Gigaset.net wizard is started. You have 

the option of entering yourself in the 

Gigaset.net online directory with a name. 

For more information on this, please see 

the full user guide on the Internet at:

Once all the necessary entries have been 

made, the handset reverts to idle status.
If all the settings are correct and if the 

phone can make a connection to the VoIP 

server, then the internal name of the 

handset will be displayed:

If one of the following messages is dis-

played instead of the internal name after 

the connection wizard is closed, then 

either a fault has occurred or your infor-

mation was incomplete:

The phone has no connection to the Inter-

net.

¤

Check the cable connection between 

the base station and the router (the 

LED on the base station must light up) 

and the connection between the router 

and the modem/Internet connection.

¤

Check whether the phone is connected 

to the LAN. 
– It may not have been possible to 

dynamically assign an IP address to 

the phone

Please note when making these entries that 

the VoIP user data is case sensitive. Press and 

hold the 

#

 key if necessary to switch 

between upper/lower case text and numerical 

entry.

This step is only carried out when you are 

getting started (when the connection assistant 

is started up for the first time). You can also 

create the entry via the Gigaset.net directory 

To ensure that you can always be reached via 

the Internet, the router should be permanently 

connected to the Internet.

¨

V