Motorola V.100 用户手册
T
roub
le
shoo
ti
ng
73
73
Troubleshooting
What to do if...
Personal
Communicator
does not turn on
Communicator
does not turn on
•
Check the battery. Is it charged, properly fitted and are the contacts clean
and dry?
and dry?
You can’t make
calls
calls
•
Check the signal strength meter. If the signal is weak, move to an open
space or, if in a building, move close to a window.
space or, if in a building, move close to a window.
•
Check your network settings. Try to select another network.
•
Check your coverage map. Are restrictions set?
•
Check your Call Barring and Fixed Dialing settings.
•
Have you reached your call charge limit? Reset your limit or contact your
service provider.
service provider.
•
Have you inserted a new SIM card? Make sure no new restrictions have
been imposed.
been imposed.
You can’t
receive calls
receive calls
•
Check the signal strength meter. If the signal is weak, move to an open
space or, if in a building, move closer to a window.
space or, if in a building, move closer to a window.
•
Check Call Diversion and Call Barring settings. Check Ringer and
VibraCall™ settings. If both are off, there is no audible alert.
VibraCall™ settings. If both are off, there is no audible alert.
Personal
Communicator
won’t unlock
Communicator
won’t unlock
•
Have you inserted a new SIM card? Enter the new PIN code.
•
Do you have a replacement communicator? Enter the default unlock code
of 1234.
of 1234.
•
Did you forget your unlock code? Press
%
to change it (you will need
your security code).
Your PIN is
blocked
blocked
• Enter the PIN unblocking code supplied with your SIM card.
1036b10o.fm Page 73 Friday, July 14, 2000 2:29 PM