Motorola G24 用户手册
Chapter 3: AT Commands Reference
December 31, 2007
AT Commands Reference Manual
3-51
+MCST: 3
+MCST: 17
NO CARRIER
+MCST: 1
+TCLCC, List Current Calls
This command displays a list of all current G24 calls and their statuses, and also enables/disables
the unsolicited indication of the call list.
the unsolicited indication of the call list.
This command is operational only with specific Telematics products.
Operation of this command is flex dependant.
Command
Type
Syntax
Response/Action
Remarks
Set
AT+TCLCC=<state>
OK
or:
+CME ERROR: <err>
Set unsolicited reporting on/off.
Read
AT+TCLCC?
+TCLCC:<state>
or:
+CME ERROE:<err>
Read the current setting.
Execute
AT+TCLCC
+TCLCC:
<idx>,<dir>,<callstate>
,<mode>,<mpty>,[<exit
cause>]
,<mode>,<mpty>,[<exit
cause>]
[,<number>,<type>][<
CR><LF>+TCLCC:
<idx>,<dir>,<callstate>
,<mode>,<mpty>,[<exit
cause>]
<idx>,<dir>,<callstate>
,<mode>,<mpty>,[<exit
cause>]
[,<number>,<type>][…
]]
OK
or:
+CME ERROE:<err>
Read the current call status.
Test
AT+TCLCC=?
+TCLCC: (List of
supported<state>s)
supported<state>s)
OK
or:
+CME ERROE:<err>
Show list of supported modes.