Motorola G24 用户手册

Call Control

3-64

AT Commands Reference Manual

December 31, 2007

Example

AT+CSSN=?// test command

+CSSN: (0-1),(0-1)

AT+CSSN=0,0// disable both options

AT+CSSN=1,0// set n value as enabled, m disabled

AT+CSSN?

+CSSN: 1,0// display the current n & m values

+CSSI: 1// displayed after mobile originated call setup of call forward and n enable

+CSSU: 2//displayed when a call has been placed on hold (during the call) using the +CHLD AT command

and m enable

Call on hold has been released
(during a voice call; not a
supplementary service
notification)

Yes

Forward check supplementary
service message received (can be
received at any time)

Yes

Call is being connected with the
remote party in an alerted state
using an explicit call transfer
operation (during a voice call).

Yes

Call has been connected with the
other remote party using an
explicit call transfer operation
(during a voice call or during
mobile-terminated call setup).
Number and subaddress
parameters may be present:
<number>String type phone
number of format defined by
<type>
<type>Type of address octet in
integer format (refer to GSM
04.08 [8], subclause 10.5.4.7)
<subaddr>String type subaddress
of format defined by <satype>
<satype>Type of subaddress
octet in integer format (refer to
GSM 04.08 [8], subclause
10.5.4.8)

Yes

Deflected call
(mobile-terminated call setup)

Table 3-33: +CSSU Notification Values (Cont.)

Value

Description

G24 Support