Motorola G24 用户手册

下载
页码 642
Chapter 3:  AT Commands Reference
 December  31, 2007
AT Commands Reference Manual
3-91
Example
AT+MDBR=1,10
+MDBR:3,"13:30","07/02/15","Weekly Meeting",1,2,"3,4"
OK
AT+MDBR=?
+MDBR:500,1,64,8,2
OK
+MDBW, Write Date Book Entry
This command enables the user to store a new entry in the date book, or edit an existing entry 
from the date book. A particular entry in the date book can be stored, or the next available entry is 
used. The entry is selected by <index>, the time and date are entered into the <Time> and <Date> 
fields. If these fields are omitted or set to past time, CME ERROR: <err> is returned. If the 
<index> field is omitted, but time and date are entered in the <Time> and <Date> fields, the entry 
is entered into the first available entry in the date book. If the writing fails in a G24 error, +CME 
ERROR: <err> is returned.
The phone book and date book are share dynamic memory storage. If the writing fail in a G24 
error in case of "full memory" error while the memory is not full by 'used' field of +MDBR 
command (Refer to 
). It is recommended 
checking the memory's capacity of the dynamic memory storage by +MPDPM command (Refer 
to 
Exceptions
A list of exception instance numbers for the requested 
entry.
Numbers in 0-65534 range.
Entries
Total number of date book.
Used
Number of entries currently used.
tLength
The maximum number of characters in the <Title> 
entry.
mException
The maximum number of exceptions.
Actions
The maximum number of actions.
Table 3-47: +MDBR Parameters
<Parameter>
Description