Motorola G24 用户手册
Chapter 3: AT Commands Reference
December 31, 2007
AT Commands Reference Manual
3-453
Multiple Channel Definitions
The following table provides various multiple channel definitions.
GPRS Definitions
•
A GPRS session is suspended when a voice/CSD call is connected to the G24. The GPRS
session is resumed when the voice/CSD call is disconnected. The voice/CSD call can be
dialed when the GPRS session is either in online DATA mode or online COMMAND mode.
session is resumed when the voice/CSD call is disconnected. The voice/CSD call can be
dialed when the GPRS session is either in online DATA mode or online COMMAND mode.
•
A GPRS session cannot be started (ERROR returned) when there is an active or established
Voice/CSD call.
Voice/CSD call.
•
Simultaneous GPRS sessions of any kind (internal and/or external) are not supported.
Note:
While G24 is operating network-related AT commands, such as SMS or Supplementary
Services, GPRS session behavior will be the same as for Voice/CSD call, but for brief
moments only.
Services, GPRS session behavior will be the same as for Voice/CSD call, but for brief
moments only.
Note:
•
RING Alert: When the call type is unrecognized, it is considered as a voice call.
In such a case, RING will be sent to IDLC-2 only.
In such a case, RING will be sent to IDLC-2 only.
•
When IDLC-1 (External modem) is active, no operation should be made in
IDLC-3 and IDLC-4. When IDLC-3 or IDLC-4 are active, no operation should
be made in IDLC-1.
IDLC-3 and IDLC-4. When IDLC-3 or IDLC-4 are active, no operation should
be made in IDLC-1.
•
In the case of a 2-channel configuration (IDLC1 = External modem + GPRS +
CSD; IDLC2 = AT and VC), the IDLC-1 commands that are allowed comprises
the combination of the above DLC-1, IDLC-3 and IDLC-4 columns.
CSD; IDLC2 = AT and VC), the IDLC-1 commands that are allowed comprises
the combination of the above DLC-1, IDLC-3 and IDLC-4 columns.
Table 3-291: Multiple Channel Definitions
Term
Description
Command
response
response
A response to a command is delivered back to the channel from which the command
was sent.
was sent.
Unsolicited
indication
indication
Unsolicited indications are sent only to the channel that enabled them. Enabling
indications where it is not allowed may cause unexpected results.
Exception: Some of the indications can be enabled only in one specific channel. For
more information, refer to
indications where it is not allowed may cause unexpected results.
Exception: Some of the indications can be enabled only in one specific channel. For
more information, refer to
.
AT+CMUX
command
command
Any G24 IDLC receiving an AT+CMUX command returns an ERROR response –
+CMEE: "operation not allowed".
+CMEE: "operation not allowed".
Common
settings for all
channels
settings for all
channels
Settings that are not stored in the IDLC modem profile, but that are set in one of the
G24 components. Any modification to these settings overrides the previous settings in
all the other channels.
For example, Database settings (phonebook, Flex, audio settings, network (SIM)
settings, and so on. For this reason, parallel commands are not allowed in more than
one channel. All the settings that are private for each channel (can be different in
different channels) are mentioned in the Profile Definition column in
G24 components. Any modification to these settings overrides the previous settings in
all the other channels.
For example, Database settings (phonebook, Flex, audio settings, network (SIM)
settings, and so on. For this reason, parallel commands are not allowed in more than
one channel. All the settings that are private for each channel (can be different in
different channels) are mentioned in the Profile Definition column in
.