Motorola G24 用户手册
December 31, 2007
AT Commands Reference Manual
A-1
Appendix A: Reference Tables
This appendix contains the following sections:
•
AT Commands Alphabetical Summary, below
•
AT Commands Behaviour With UART2 Fully Functional,
•
Character Set Table CS1: (GSM -> UCS-2),
•
Character Set Table CS2: (ASCII <-> UTF-8),
•
Character Set Table CS3: (UCS-2 <-> UTF-8),
•
Character Set Table CS6: (UCS-2 Full Table),
•
Character Set Table CS7: (ASCII table),
Note:
Character Set Table CS6: (UCS-2) is provided on CD due to its size.
AT Commands Alphabetical Summary
The following table contains an alphabetical list of all the G24 AT commands.
Table A-1: AT Commands (Alphabetical)
AT Command
Description
Page
$
This command displays a list of
all the AT commands supported
by the G24.
all the AT commands supported
by the G24.
%C
This command is supported for
backward compatibility only, and
has no effect.
backward compatibility only, and
has no effect.
&C
This command determines how
the state of the DCD line relates
to the detection of the received
line signal from the distant end.
the state of the DCD line relates
to the detection of the received
line signal from the distant end.
&D
This command determines how
the G24 responds when the DTR
(Data Terminal Ready) status is
changed from ON to OFF during
the online data state.
the G24 responds when the DTR
(Data Terminal Ready) status is
changed from ON to OFF during
the online data state.
&F
This command restores the
factory default configuration
profile.
factory default configuration
profile.