Motorola V60v 用户手册
Section 2A: Your PCS Phone: The Basics
16
Your Phone’s Battery
Your phone is designed to use only Motorola original batteries and
accessories. We recommend that you store batteries in their
protective cases when not in use.
accessories. We recommend that you store batteries in their
protective cases when not in use.
Battery Capacity
Your PCS Phone has a Lithium Ion (Li-Ion) rechargeable battery.
Recharge the battery before it is fully drained. The battery provides
approximately 240 minutes of continuous talk time (210 minutes in
CDMA 2000 and 85 minutes in analog) or approximately 190 hours
of continuous standby time (310 hours in CDMA 2000 and 15 hours
in analog).
Recharge the battery before it is fully drained. The battery provides
approximately 240 minutes of continuous talk time (210 minutes in
CDMA 2000 and 85 minutes in analog) or approximately 190 hours
of continuous standby time (310 hours in CDMA 2000 and 15 hours
in analog).
Installing the Battery
Before you can use your phone, install and charge the battery:
1.
Remove the battery from its protective case.
2.
If the phone’s battery door is already in
place, push the door release latch down
and remove cover.
place, push the door release latch down
and remove cover.
3.
Insert the battery, printed arrow first, into
the battery compartment and push down.
the battery compartment and push down.
4.
Insert the ridge at the bottom of the
battery door into the base of the phone,
then push the door down and snap it into
place.
battery door into the base of the phone,
then push the door down and snap it into
place.
Note:
Long backlight settings, searching for service, and vibrate mode affect
the battery’s talk and standby times.
the battery’s talk and standby times.
Tip:
Watch your phone’s battery level indicator and charge the battery before
it runs out of power.
it runs out of power.