Motorola Timeport Phone 用户手册
12
Introduction to Batteries
Each battery is shipped in an uncharged state with a protective
clip on it. Before you can use your phone, you will need to
remove the clip from the battery and charge it.
clip on it. Before you can use your phone, you will need to
remove the clip from the battery and charge it.
Battery Clips
It is a good idea to save the protective clip to store and carry the
battery when not in use. The clip prevents objects from touching
the battery terminals, thereby reducing the risk of injury or
damage from a short circuit.
battery when not in use. The clip prevents objects from touching
the battery terminals, thereby reducing the risk of injury or
damage from a short circuit.
Removing the Main Battery Clip
Attaching the Main Battery Clip
1.
Press In
Latch
Latch
Press in the release latch.
2.
Remove
Battery
Battery
Rotate the battery upward and lift it out of
the protective clip.
the protective clip.
1.
Lower
Side
Side
Lower the side opposite the release latch into
the clip.
the clip.
2.
Click
Latch
Latch
Drop the side with the release latch down
until the latch clicks.
until the latch clicks.
Release Latch
1.
2.
1.
2.