Nokia 51XX 用户手册

 

 

9

     
        ++++++++++++++        ############## 
        +TMSIaaaaaaaa+        #TMSI(hex)   # 
        +T321:bbb/ccc+        #T3212ctr/tim# 
        +PRP:d  ee ff+        #PaRP DSF AGC# 
        + ggggg  hhh +        #  AFC   Ch  # 
        ++++++++++++++        ############## 
 
 

aaaaaaaa 

last assigned TMSI value in hex format 

bbb 

Current value of T3212 counter (range is 000 - 'ccc'), where 1 means 6 min 
time. So, if this value is 2 less than 'ccc' then next periodic location 
updating will be made within 2 * 6 min = 12 minutes. 

ccc 

Timeout value of T3212 counter (range is 000 - 240, where 1 means 6 min 
time between location updates and 240 means 240 * 6 min = 24 h between 
location updates. 000 means that a periodic location update will not 
occur)  This value is received from the network. 

d 

Value of paging repetition period (range is 2 – 9, which means paging will 
be in every Xth multiframe. When paging is in every second multiframe, 
mobile takes more current than if it were in every 9th multiframe) 

ee 

Downlink signalling failure value. If value is negative, 0 is shown. 
Maximum value is 45. When mobile is on TCH then xx is shown. 

ff 

Gain value on TCH/SDCCH, range is 0 - 93 

ggggg 

VCTCXO AFC DAC control, range is -1024 - 1023 

hhh 

Serving cell channel number 

 
 

 
        ++++++++++++++         ############## 
        +CC:aaa NCbbb+         # MCC    MNC # 
        + LAC:ccccc  +         #LocAreaCode # 
        + CH : dddd  +         #ServChannel # 
        + CID:eeeee  +         #   CellId   # 
        ++++++++++++++         ############## 
 
 

aaa 

MCC value in decimal (MCC=Mobile Country Code) 

bbb 

MNC value in decimal (MNC=Mobile Network Code) 

Three digits are shown only in GSM1900.  
Two digits are shown in GSM900 and GSM1800. 

ccccc 

LAC value in decimal (in older SW-versions this value is in hexadecimal) 

dddd 

Serving cell channel number 

eeeee 

Cell Identifier in decimal (in older SW-versions this value is in 
hexadecimal) 

 
 

 
        ++++++++++++++         ############## 
        +CIPHER :aaa +         #CipherValue # 
        +HOPPING:bbb +         #HoppingValue# 
        +DTX    :ccc +         #DTXValue    # 
        +IMSI   :ddd +         #IMSIAttach  # 
        ++++++++++++++         ############## 
 
 

aaa 

ciphering value, OFF/A51/A52 

bbb 

hopping value, ON/OFF 

ccc 

DTX value ON/OFF 

ddd 

IMSI attach  

ON  : IMSI attach on  
OFF : IMSI attach off 

 

These values are updated only on when the phone is active on a TCH.