Panasonic 700 用户指南

Section 700 - Operation

Chapter 3. System Features

DBS-2.3/9.2-700

DBS Manual - Revised April 2000

  Page 3-7

4.  Enter the Answer Signal Code (1 to 5 digits).

5. Press 

the 

HOLD key.

1. Press 

the 

ON/OFF key.

2. Press 

the 

CONF key.

3. Dial 

“#94.”

• The digits used for the answer signal code are determined by the 

requirements of the voice mail system.

• If the called extension does not answer and is forwarded to voice mail, the 

DBS sends a call forward ID code back to the voice mail system.

• During transmission of the answer signal code, other DTMF digits and 

functions from the DBS extension are ignored.

(CPC-AII prior to 7.0 and CPC-B Version 4.0 to 6.11)

Auto Day Mode allows the DBS to go into day mode automatically.

The DBS can also be programmed to go into night mode automatically (see 
“Night Service,” page 3-35).

If only one of the auto modes is turned on, the NIGHT key is used to turn off 
the auto mode. For instance, if night mode has been activated automatically, 
the attendant must press the NIGHT key to go into day mode.

If only one of the auto modes is turned on, the NIGHT key can also be used 
to go into an auto mode before the scheduled time.

If both auto day and auto night modes are turned on, the attendant NIGHT 
key cannot be used.