Xerox 425 用户手册

Prior to entering Low Power or Power Save (Auto Off/Sleep), 
the machine is in Stand-by Mode whenever it is not copying, 
faxing, scanning or printing a job. The touch screen is visible 
and ready to be programmed.

As delivered, the machine automatically switches into Low 
Power Mode 15 minutes after the last copy/print out. In this 
mode, the touch screen is blank and the Power Save Indicator 
light is on.

The machine is re-activated if the touch screen or any button 
on the control panel is touched, the document feeder is loaded, 
a paper tray opened, a job is submitted to the print queue (fax 
receive or network print), or a fax or print job arrives in the print 
queue. The machine responds within one second and all the 
features are available within 30 seconds.

The factory default setting of 15 minutes is customer 
changeable within the range of 5 to 240 minutes. For more 
information refer to “Changing the Default Time Settings” on 
page 2-12.

As delivered, the machine automatically switches into Power 
Save (Auto Off/Sleep) Mode, 60 minutes after the last copy/
print out. In this mode the copier version of the DC 426/420 
switches the Power ON/OFF switch to the off position. Any 
stored jobs remain in the memory and the DC 426/420 returns 
to an operational condition when powered ON.

In Power Save (Auto Off/Sleep) Mode on the copier/printer/fax 
version of the DC 426/420 and all DC 440/432/430/425 
configurations, the touch screen is blank and the Power Save 
light is lit. The machine is re-activated if the touch screen or any 
button on the control panel is touched, the document feeder is 
loaded, a paper tray opened, a job is submitted to the print