Impex MS-93 用户手册

STEP 1 (See Diagram 1) 
 
A.)  Thread the Knob Bolt (#15) into the hole in the font of the Base Frame (#1). Turn the 

Knob Bolt clockwise to secure the Pedals (#13). Note: The height of the pedals can be 
adjusted by turning the Knob. Clockwise to increase the height and counterclockwise to 
decrease the height. 

B.)  Connect the Magnet Sensor Wire (#20) from the Base Frame to the Computer Sensor 

Wire (#21) from the Lower Frame (#5). 

C.)  Insert the Lower Frame into the Base Frame. Secure it with four M8 x 5/8” Allen Bolts 

(#32), four Ø 5/8” Lock Washers (#37), and four Ø 5/8” Curved Washers (#36).