Siemens XT65 用户手册
Java User’s Guide
9.4 Run on the Module with Autostart
66
s
wm_java_usersguide_v12
Page 66 of 123
2008-02-25
Confidential / Released
9.4
Run on the Module with Autostart
•
Compile the application at the prompt as discussed in
or in an SMTK integrated
IDE.
•
Transfer the .jar and .jad file from the development platform to the desired directory on the
module using the Module Exchange Suite or OTA provisioning. See
module using the Module Exchange Suite or OTA provisioning. See
.
9.4.1
Switch on Autostart
•
There is an AT command, AT^SCFG, for configuring the autostart functionality. Please refer
to
to
•
Restart the module.
9.4.2
Switch off Autostart
There are three methods for switching off the autostart feature:
•
•
the AT^SCFG command, or
•
the graphical “autoexec_off.exe“ tool (included in the Installation CD software under wtk/
bin), or
bin), or
•
the command line “cmd_autoexec_off.exe“ tool (included in the Installation CD software
under wtk/bin).
under wtk/bin).
To disable the automatic start of a user application in a module these steps must be carried out:
Using the graphical “autoexec_off.exe” tool:
1. Connect the module to the PC
2. Make sure, that the module is switched off
3. Start the “Autoexec_Off” program
4. Select the COM-Port
5. Press the “AutoExec Off” button
1. Connect the module to the PC
2. Make sure, that the module is switched off
3. Start the “Autoexec_Off” program
4. Select the COM-Port
5. Press the “AutoExec Off” button
Using the command line tool “cmd_autoexec_off.exe”:
1. Connect the module to the PC
2. Make sure, that the module is switched off
3. Start the command line tool “cmd_autoexec_off” with option <com-port> (com1 up to
1. Connect the module to the PC
2. Make sure, that the module is switched off
3. Start the command line tool “cmd_autoexec_off” with option <com-port> (com1 up to
com99 for com port selection)