Philips M888 用户手册

45

EN

21 Frequently 

asked questions

No signal bar is displayed on the screen.

 • The handset is out of range. Move it closer 

to the base station.

 • If the handset displays [Register your 

Handset], put the handset on the base 

until the signal bar appears.

Tip

 

•

For further information, see 'Register additional 

handsets' on the Services section.

My handset is in searching status, what do I 

do?

 • Make sure that the base station has power 

supply.

 • Register the handset to the base station.

 • Move the handset closer to the base 

station.

If I fail to pair (register) additional handsets to 

the base station, what do I do?

Your base memory is full. Unregister the unused 

handsets and try again. 

I have chosen a wrong language which I cannot 

read, what do I do?

1 

Press   to go back to the standby screen. 

2 

Press   to access the main menu screen.

3 

Press   /   to select  , then you see one 

of the following texts appear on the screen:

語言
Language

4 

Select it to access the language options.

5 

Select your own language.

No dialing tone

 • Check your phone connections.

 • The handset is out of range. Move it closer 

to the base station.

No docking tone

 • The handset is not placed properly on the 

base station/charger. 

 • The charging contacts are dirty. Disconnect 

the power supply first and clean the 

contacts with a damp cloth.

I cannot change the settings of my voice mail, 

what do I do?

The voice mail service is managed by your 

service provider but not the phone itself. 

Contact your service provider to change the 

settings.

The handset on the charger does not charge.

 • Make sure the batteries are inserted 

correctly.

 • Make sure the handset is placed properly 

on the charger. The LED at the back of the 

handset flashes once when charging.

 • Make sure the docking tone setting is 

turned on. When the handset is placed 

correctly on the charger, you can hear a 

docking tone.

 • The charging contacts are dirty. Disconnect 

the power supply first and clean the 

contacts with a damp cloth.

 • Batteries are defective. Purchase new ones 

with the same specifications. To remove the 

battery door, refer to the instruction in the 

following picture.

 

No display

 • Make sure the batteries are charged.

 • Make sure there is power and the phone is 

connected.

Bad audio (crackles, echo, etc.)

 • The handset is nearly out of range. Move it 

closer to the base station.