Cisco Systems 78-10588-03 用户手册
3-13
Cisco Metro 1500 Series Hardware Installation Guide
78-10588-03
Chapter 3
Installing the Chassis
Connecting Power
Figure 3-6
Connecting Wires
Step 4
Connect the three wires on the other end to the corresponding high current
connectors of the power distribution unit. Attach the wires to their respective
points in the connectors.
connectors of the power distribution unit. Attach the wires to their respective
points in the connectors.
Caution
Make sure that the three wires of the power cables are correctly fixed
at the clamps of the PDU connectors.
at the clamps of the PDU connectors.
Caution
Never connect blue (negative) or brown (positive) wires to the
ground pin.
ground pin.
Step 5
Turn the power on using the corresponding power switch of the PDU.
Green/yellow wire (ground)
Blue wire (negative)
Brown wire (positive)
50328