Black Box Compact Video Splitters 用户手册
724-746-5500 | blackbox.com
Page 14
Chapter 3: Installation/Chapter 4: Operation
2. You’ll also need to connect the Compact Video Splitter’s input connector to the
VGA source. Use an HD15 male-to-male cable (included) for this connection.
3. Connect the included power supply cord’s barrel connector to the barrel
connector receptacle on the Compact Video Splitter. Then plug the other end
of the power cord into an AC outlet.
of the power cord into an AC outlet.
4. Operation
Once the Compact Video Splitter is installed, it operates unattended. The splitter has
two front-panel LEDs that indicate its status at a glance.
• The Active LED lights when there is a VGA signal at the input port.
• The Power LED lights when the Compact Video Splitter is powered by the 5-VDC
two front-panel LEDs that indicate its status at a glance.
• The Active LED lights when there is a VGA signal at the input port.
• The Power LED lights when the Compact Video Splitter is powered by the 5-VDC
power adapter.