Linksys DES-3028/DES-3028P/DES-3052/DES-3052P 用户手册

DES-3028 DES-3028P DES-3052 DES-3052P  Layer 2 Fast Ethernet Switch CLI Reference Manual 

The VLAN commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following 
table. 

create vlan 

<vlan_name 32> {tag <vlanid 2-4094> | advertisement} 

delete vlan 

<vlan_name 32> 

config vlan 

<vlan_name 32> {[add [tagged | untagged | forbidden] | delete] 
<portlist> | advertisement [enable | disable]} 

config gvrp 

[<portlist> | all] {state [enable | disable] | ingress_checking [enable 
| disable] | acceptable_frame [tagged_only | admit_all] | pvid 
<vlanid 1-4094>} 

enable gvrp 

 

disable gvrp 

 

show vlan 

<vlan_name 32> 

show gvrp 

<portlist> 

Each command is listed, in detail, in the following sections. 

Purpose 

Used to create a VLAN on the Switch. 

Syntax 

Description 

This command allows the user to create a VLAN on the Switch. 

Parameters 

− The name of the VLAN to be created. 

<vlanid 2-4094> 

− The VLAN ID of the VLAN to be created. Allowed 

values = 2-4094 
advertisement 

−  Specifies that the VLAN is able to join GVRP.  If 

this parameter is not set, the VLAN cannot be configured to have 
forbidden ports. 

Restrictions 

Each VLAN name can be up to 32 characters. If the VLAN is not 
given a tag, it will be a port-based VLAN. Up to 4094 static VLANs 
may be created per configuration. Only administrator-level users 
can issue this command. 

Example usage: 

To create a VLAN v1, tag 2: 

 
 

 

108