Linksys DES-3028/DES-3028P/DES-3052/DES-3052P 用户手册

DES-3028 DES-3028P DES-3052 DES-3052P  Layer 2 Fast Ethernet Switch CLI Reference Manual 

The link aggregation commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the 
following table. 

create link_aggregation   group_id <value 1-6> {type [lacp | static]} 

delete link_aggregation 

group_id <value 1-6> 

config link_aggregation 

group_id <value 1-6> {master_port <port> | ports <portlist> | state 
[enable | disable]} 

config link_aggregation 
algorithm 

[mac_source | mac_destination | mac_source_dest] 

show link_aggregation 

{group_id <value 1-6> | algorithm} 

config lacp_port 

<portlist> mode [active | passive] 

show lacp_port 

{<portlist>} 

Each command is listed, in detail, in the following sections. 

Purpose 

Used to create a link aggregation group on the Switch. 

Syntax 

This command will create a link aggregation group with a unique 
identifier. 

Parameters 

<value> 

− Specifies the group ID. The Switch allows up to 6 link 

aggregation groups to be configured. The group number identifies each 
of the groups. 
type – Specify the type of link aggregation used for the group. If the type 
is not specified the default type is static.  

Restrictions Only 

administrator-level users can issue this command. 

Description 

lacp – This designates the port group as LACP compliant. 
LACP allows dynamic adjustment to the aggregated port 
group. LACP compliant ports may be further configured (see 
config lacp_ports). LACP compliant must be connected to 
LACP compliant devices. 

• 

• 

static – This designates the aggregated port group as static. 
Static port groups can not be changed as easily as LACP 
compliant port groups since both linked devices must be 
manually configured if the configuration of the trunked group is 
changed. If static link aggregation is used, be sure that both 
ends of the connection are properly configured and that all 
ports have the same speed/duplex settings. 

Example usage: 

To create a link aggregation group: 

 

113