Linksys DES-3028/DES-3028P/DES-3052/DES-3052P 用户手册
DES-3028 DES-3028P DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
4
B
ASIC
S
WITCH
C
OMMANDS
The basic switch commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table.
following table.
Command Parameters
create account
[admin | user] <username 15>
config account
<username 15>
show account
delete account
<username 15>
show session
show switch
show serial_port
config serial_port
{baud_rate [9600 | 19200 | 38400 | 115200] auto_logout [never | 2_minutes |
5_minutes | 10_minutes | 15_minutes]}
5_minutes | 10_minutes | 15_minutes]}
enable clipaging
disable clipaging
enable telnet
<tcp_port_number 1-65535>
disable telnet
telnet
<ipaddr> {tcp_port <value 0-65535>}
enable web
<tcp_port_number 1-65535>
disable web
save
reboot
reset
{[config | system]}
login
logout
Each command is listed, in detail, in the following sections.
create account
Purpose
Used to create user accounts.
Syntax
create [admin | user] <username 15>
Description
The create account command is used to create user accounts that
consist of a username of 1 to 15 characters and a password of 0 to
15 characters. Up to 8 user accounts can be created.
consist of a username of 1 to 15 characters and a password of 0 to
15 characters. Up to 8 user accounts can be created.
Parameters
admin <username>
user <username>
user <username>
Restrictions
Only Administrator-level users can issue this command.
Usernames can be between 1 and 15 characters.
Passwords can be between 0 and 15 characters.
Usernames can be between 1 and 15 characters.
Passwords can be between 0 and 15 characters.
Example usage:
10