Roland R-05 用户手册
46
Recording
1.
Press [MENU] to access the “Menu” screen,
use [
use [
]/[
] to select “Input Setup,” and
then press [
].
fig.recoedersetting.eps_80
2.
Use [
]/[
] to move the cursor to the
Rehearsal Time setting, and use [
]/[
]
to specify the time.
fig
3.
Press [MENU] twice to return to the main
screen.
screen.
4.
Point the mic toward the source you want to
record, and press [REHEARSAL].
record, and press [REHEARSAL].
fig
The recording level will automatically be set
according to the loudest volume that occurs
during the specified Rehearsal Time. At the same
time, the unit will also perform a test to
determine the appropriate sensitivity for the mic.
When the setting is completed, the R-05 will
enter recording-standby mode. If the Rehearsal
Time is set to MANUAL, press [REHEARSAL] once
again to finish the rehearsal.
according to the loudest volume that occurs
during the specified Rehearsal Time. At the same
time, the unit will also perform a test to
determine the appropriate sensitivity for the mic.
When the setting is completed, the R-05 will
enter recording-standby mode. If the Rehearsal
Time is set to MANUAL, press [REHEARSAL] once
again to finish the rehearsal.
A message such as the following will appear if
the setting of the [GAIN] switch on the rear panel
does not match the appropriate mic sensitivity,
as detected by the unit. In such cases, you need
to change the switch’s setting as directed.
the setting of the [GAIN] switch on the rear panel
does not match the appropriate mic sensitivity,
as detected by the unit. In such cases, you need
to change the switch’s setting as directed.
(Default in bold)
Setting
Manual
30sec
1min
3min
5min
R-05-e.book 46 ページ ２０１０年２月１９日 金曜日 午後４時５５分