Roland AR-200 用户手册

下载
页码 72
 
16
Cards Handled by the AR-200
 
Notes Regarding Formatting
 
Performing formatting erases all data on the card. Before you format the 
card, make sure it contains no data you don’t want to lose.
 
* A maximum of 250 phrases may be created on cards formatted on the AR-200.
* The available recording time for a single card varies according to card capacity and 
recording settings.
* For a rough guide to maximum recording times with various settings, see the 
 
"Card Audio Recording Time Chart"
 
 
Procedure for Formatting Cards
 
1
 
Confirm that there is no card inserted in the card slot.
 
2
 
Hold down the STOP button for at least 5 seconds
 
A flashing “Fot” appears.
 
fig.card-01
 
3
 
Insert the card that you wish to format into card slot.
 
4
 
Press the PLAY button, formatting will begin.
 
5
 
If you wish to stop the process, press the STOP button.
 
When formatting is completed, the message is changed in the display.
 
fig.card-02
 
Important Notes on Handling Cards
 
• When Inserting
Insert the card all the way into the card slot.
• When Removing
To remove the card, press the eject button.
Never remove a card during recording, playback, or formatting.
Furthermore, do not turn off the power or remove the AC adaptor cord 
during recording, playback, or formatting. Doing so may damage the card.
Depending on the length of 
stored phrases, it may not 
be possible to create the set 
maximum number of 
phrases.
Never remove a card while 
formatting is in progress.
AR-200_e.book 16 ページ 2003年7月14日 月曜日 午後1時11分