Roland AR-200 用户手册

 

• Do not use this unit on the same power circuit with any 

device that will generate line noise (such as an electric 
motor or variable lighting system).

• The AC adaptor will begin to generate heat after long 

hours of consecutive use. This is normal, and is not a 
cause for concern.

• Before connecting this unit to other devices, turn off the 

power to all units. This will help prevent malfunctions 
and/or damage to speakers or other devices.

 

• This device may interfere with radio and television 

reception. Do not use this device in the vicinity of such 
receivers.

• To avoid possible breakdown, do not use the unit in a wet 

area, such as an area exposed to rain or other moisture.

 

• For everyday cleaning wipe the unit with a soft, dry cloth 

or one that has been slightly dampened with water. To 
remove stubborn dirt, use a cloth impregnated with a 
mild, non-abrasive detergent. Afterwards, be sure to wipe 
the unit thoroughly with a soft, dry cloth.

• Never use benzine, thinners, alcohol or solvents of any 

kind, to avoid the possibility of discoloration and/or 
deformation.

 

• Unfortunately, it may be impossible to restore the contents 

of data that was stored DATA card once it has been lost. 
Roland Corporation assumes no liability concerning such 
loss of data.

• Use a reasonable amount of care when using the unit’s 

buttons, sliders, or other controls; and when using its jacks 
and connectors. Rough handling can lead to malfunctions.

• Never strike or apply strong pressure to the display.

• When connecting / disconnecting all cables, grasp the 

connector itself—never pull on the cable. This way you 
will avoid causing shorts, or damage to the cable’s 
internal elements.

• To avoid disturbing your neighbors, try to keep the unit’s 

volume at reasonable levels. You may prefer to use 
headphones, so you do not need to be concerned about 
those around you (especially when it is late at night).

•  When you need to transport the unit, package it in the box 

(including padding) that it came in, if possible. Otherwise, 
you will need to use equivalent packaging materials.

• Use a cable from Roland to make the connection. If using 

some other make of connection cable, please note the 
following precautions.

• Some connection cables contain resistors. Do not use 

cables that incorporate resistors for connecting to this 
unit. The use of such cables can cause the sound level 
to be extremely low, or impossible to hear. For infor-
mation on cable specifications, contact the manufac-
turer of the cable.

 

• Never attempt to remove a PC Card from the drive while 

the drive is operating (the indicator is lit); damage could 
result to both the card and the drive.

• Remove any disk from the drive before powering up or 

down.

• To avoid the risk of malfunction and/or damage, insert 

only PC Cards into the disk drive. Never insert any other 
type of disk. Avoid getting paper clips, coins, or any other 
foreign objects inside the drive.

 

• Carefully insert the PC card all the way in—until it is 

firmly in place.

 

• Unauthorized recording, distribution, sale, lending, public 

performance, broadcasting, or the like, in whole or in part, 
of a work (musical composition, video, broadcast, public 
performance, or the like) whose copyright is held by a 
third party is prohibited by law.

• Do not use this unit for purposes that could infringe on a 

copyright held by a third party. Roland assumes no 
responsibility whatsoever with regard to any infringe-
ments of third-party copyrights arising through your use 
of this unit.

PC card

Eject button

AR-200_e.book 4 ページ ２００３年７月１４日　月曜日　午後１時１１分