Roland R-26 用户手册

Here’s how to supply phantom power to the 

mics connected to the ANALOG IN 1/L jack 

and ANALOG IN 2/R jack.

Ú

Ú

*  If you’ve set LINK or MS mic as the input 

type, all you need to do for phantom 

power to be supplied is to make the 

setting [INPUT1 PHANTOM].

*  Always turn the phantom power off 

when connecting any device other than 

condenser microphones that require 

phantom power to the XLR connector. 

You risk causing damage if you 

mistakenly supply phantom power to 

dynamic microphones, audio playback 

devices, or other devices that don’t 

require such power. Be sure to check the 

specifications of any microphone you 

intend to use by referring to the manual 

that came with it. 

(This instrument’s phantom power: 48 V 

DC, 10 mA Max)

menu screen (p . 18) .

Here’s how to adjust the MS mic’s stereo 

width.

Ú

Ú

“MS-MIC WIDTH” is located on page 2/2. 
Touch 

 to access 2/2.

*  The <MS-MIC WIDTH> setting is shown 

only if the input type is set to MS mic.