Roland R-26 用户手册

The blinking 

 will change to a steadily 

lit 

 indication.

After recording has begun, you can turn 

on the [HOLD] switch so that recording 

will not stop even if a button is pressed 

inadvertently.

*  Even with the [HOLD] switch turned on, 

the input level adjustment knobs will 

remain functional.  

The input level will be changed if you 

operate the input level adjustment 

knobs while in recording-standby mode 

or during recording. Take care not to 

inadvertently operate the input level 

knobs.

*  It’s not possible to turn off the power 

during recording. You must first stop 

recording before you can turn off the 

power.

The REC indicator will go out.

The display will indicate the project that 

was recorded. Press the [PLAY] button to 

play back the recorded sound.

•  To delete the recorded project, please 

refer to “Deleting a Project or a Folder” 

•  To pause, press [

]. To resume 

recording from the paused state, press  

[

] once again.

•  If you’ve set “number” for the project 

name in REC SETUP, the project will 

automatically be assigned a name such 

as R26_0001. The 0001 portion will 

be the number following the highest-

numbered project name that exists.

•  If you’ve set “date” for the project name 

in REC SETUP, the date of recording will 

be the project name.