Roland AR-3000R 用户手册
103
Controlling Another Device with the AR-3000R
Applications
AR-3000R Settings
The setting for the Busy Out signal is a system-wide setting
(that is, it is not made separately for individual phrases).
(that is, it is not made separately for individual phrases).
The setting for whether the Busy Out signal is output is made
separately in the following three situations. Choose the one
that matches your usage conditions.
separately in the following three situations. Choose the one
that matches your usage conditions.
ON/OFF
• During phrase playback: in Phrase Play ON/OFF
Repeat Int ON/OFF
fig.15-02e (Busy Out)
Inserting into a phrase a delay time equal to the start time for
the amp (the time until sound is played) can help prevent
drop-out at the beginning of the phrase during playback.
the amp (the time until sound is played) can help prevent
drop-out at the beginning of the phrase during playback.
Procedure for Making the Setting for Busy Out
Signal Output
Signal Output
1.
Press the MODE button.
The MODE indicator lights up.
2.
Use the SELECT dial to choose “9.5 Busy Out,” then
press the dial.
press the dial.
3.
Turn the SELECT dial to choose “in Delay Time (OFF or
ON),” then press the dial.
ON),” then press the dial.
fig.15-g01e
4.
Turn the SELECT dial to choose “in Phrase Play (OFF or
ON),” then press the dial.
ON),” then press the dial.
5.
Turn the SELECT dial to choose “in Repeat Interval (OFF
or ON),” then press the dial.
or ON),” then press the dial.
6.
When the prompt appears on the screen, press the
ENTER button to enable the settings.
ENTER button to enable the settings.
To quit, use the SELECT dial to choose “NO,” then press the
ENTER button.
ENTER button.
When you’re finished making the setting, the display returns
to the setting item selection screen.
to the setting item selection screen.
7.
Press the MODE button.
This ends the setting process and returns you to the usual
screen.
screen.
* While making the settings, you can go back to the previous
entry position (highlighted) by using the PAUSE (BACK)
button.
button.
* If you press the MODE button while making settings, a
message asking you to confirm that you want to exit the
setting process appears. Note that if you choose “YES,” then
press the ENTER button, you are returned to the usual screen,
and all setting changes you’ve made up to that point will be
discarded.
setting process appears. Note that if you choose “YES,” then
press the ENTER button, you are returned to the usual screen,
and all setting changes you’ve made up to that point will be
discarded.
During Repeat interval
During Delay time
During Phrase
playback
AUDIO OUTPUT
Busy Out
Make start
Make finish
Close (ON)
Open (OFF)
Open (OFF)
ON : ON : ON
ON : ON : OFF
ON : OFF : ON
ON : OFF : OFF
OFF : ON : ON
OFF : ON : OFF
OFF : OFF : ON
OFF : OFF : OFF
Repeat Int
Delay Time
Phrase Play
AR-3000R_e.book 103 ページ ２０１０年３月１８日 木曜日 午後２時６分