Roland AR-3000R 用户手册

 

fig.2-01e

 

This is for connecting a microphone during audio recording.

 

→

 

 

The outer control adjusts the volume level of the signal input to 
the Line In jack.

The inner control adjusts the microphone-input volume level.

 

fig.2-02e

 

→

 

 

The volume level of signals input to the Digital In jack cannot 
be changed.

 

This lights up when the unit reads or writes to a card.

 

When the CF card drive is in operation (that is, when the 
access indicator is illuminated), do not try to take out the 
card or turn off the power. Doing so may damage the card.

 

Do not insert any object other than a CF card (such as a wire, 
coin, or different type of card) into the card slots. Doing so 
may damage the unit.

 

→

 

 

• Pressing the PLAY button plays back a phrase. When 

playback is paused, pressing the PLAY or PAUSE button 
restarts playback.

• Holding down the STOP button and pressing the PLAY 

button puts the unit in recording standby. Pressing the 
PLAY or PAUSE button while in this state starts 
recording.

 

• Pressing the PAUSE button during playback of an audio 

phrase pauses playback. Playback resumes when the 
PLAY or PAUSE button is pressed again.

• Pressing the PLAY or PAUSE button while in the 

recording-standby state starts recording.

• When you are making settings, this button is used to 

make the insertion point (highlighted) go back one step.

(outer ring)

LINE Volume

MIC Volume

(inner ring)

 

962a

AR-3000R_e.book 12 ページ ２０１０年３月１８日　木曜日　午後２時６分