Roland AR-3000R 用户手册

下载
页码 152
 
121
Playing Two Units's Worth of Data on the Left and Right
 
Applications
 
* If you press the MODE button while making settings, a 
message asking you to confirm that you want to exit the 
setting process appears. Note that if you choose “YES,” then 
press the ENTER button, you are returned to the usual screen, 
and all setting changes you’ve made up to that point will be 
discarded.
 
Operation Procedures
 
Dual Mono Playback Through Manual 
Operation
 
You can perform manual playback, in the same way as for 
ordinary stereo playback.
 
1.
 
Insert a card containing recorded information into a slot.
 
2.
 
Turn the SELECT dial to choose the phrase number to 
play.
 
fig.18-g01e
 
* To switch between card slots A and B, press the SELECT dial.
* To switch between L (left) and R (right), press the ENTER 
button.
 
3.
 
• Pressing the PLAY button plays back a phrase. During 
playback of the phrase, the PLAY indicator lights up in 
green.
 
* The phrase whose phrase number is highlighted is played back.
 
• Pressing the STOP button ends playback.
• During playback, you can choose the next song to play 
(without stopping the phrase being played) by turning 
the SELECT dial.
 
Please be aware that you cannot pause Dual Mono playback.
 
Dual Mono Playback Through Control 
Input
 
You can perform playback through control input, in the same 
way as for ordinary stereo playback.
The settings for control-input playback basically act 
independently for each channel.
 
For more information about the operation of playback with 
control input terminals, see also “Controlling the AR-3000R 
from an External Device (Control Input)” (p. 85).
 
During Direct Playback
 
Odd-numbered phrases are output by direct playback from 
output L (left), and even-numbered phrases are output by 
direct playback from output R (right). The order of priority of 
the control input connectors may vary depending on how 
phrases are assigned to the control input terminals. To 
facilitate understanding, the explanations in this section 
assume that the assigned phrase numbers correspond to the 
port numbers.
 
fig.18-02e (Monaural and Direct Charts)
 
When you send a Stop input signal, playback stops 
simultaneously for the L and R channels.
 
* Input a trigger signal to the control signal.
* Do not simultaneously input more than one control input 
allocated to the same output.
 
● 
 
Normal Playback
 
ig.18-04e (Ordinary Playback Example 2)
 
• Because port Nos. 1 and 3 are allocated to output L, 
depending on the port priority, playback of A0003 is 
halted and A0001 is played.
• Because port No. 2 is allocated to output R, A0002 
continues to be played back even during playback of 
A0003 or A0001.
 
● 
 
First-In Playback
 
fig.18-03e (Ordinary Playback Example 1)
 
• Because port Nos. 1 and 3 are allocated to output L, 
depending on the port priority, signals input to 3 are not 
valid.
• Because port No. 2 is allocated to output R, A0002 is 
played back even during playback of A0001.
L ch
R ch
Port No.
Phrase
...
...
1
A0001
2
A0002
3
A0003 A0004
4
A0005
5
16
A0016
...
Output jack
L
R
L
R
L
R
Port 1
Output R
Port 2
Port 3
Output L
A0003
A0002
A0003 Interrupted
A0001
Port 1
Output R
Port 2
Port 3
Output L
A0001
A0002
Ignored
AR-3000R_e.book 121 ページ 2010年3月18日 木曜日 午後2時6分