Roland AR-3000R 用户手册
132
Error messages
If there has been a mistake in operation, or if the AR-3000R is
unable to continue processing as you directed, an error
message will appear in the display. Note the message that
appears, and take the appropriate action.
unable to continue processing as you directed, an error
message will appear in the display. Note the message that
appears, and take the appropriate action.
Regarding Cards
Display:
No card inserted.
Insert a card.
Insert a card.
Situation:
No card is inserted into either of the card slots.
Action:
Insert a card.
Display: Incorrect
format.
Format card.
Situation:
The CF card is not formatted for use with the
AR-3000R.
AR-3000R.
Action:
Format the CF card.
Display: Card
damaged.
Format card.
Situation:
It is possible that the data in the CF card or the
CF card itself has been damaged.
CF card itself has been damaged.
Action:
Format the CF card. If formatting is not
possible, or if the same message appears after
the card has been formatted, it may be that the
CF card is malfunctioning. Use a different CF
possible, or if the same message appears after
the card has been formatted, it may be that the
CF card is malfunctioning. Use a different CF
card.
Display: Card
full.
Delete phrases.
Situation:
Data cannot be stored on the card because
there is no free space.
there is no free space.
Action:
Increase the amount of free space on the card,
such as by deleting unneeded phrases.
Display: Unsupported
card.
Change cards.
Situation:
This memory card cannot be used by the AR-
3000R.
3000R.
Action:
Use an AR-3000R CF card
Display: Card
protected.
Write Failure.
Situation:
Card protect is set to ON, so data cannot be
written to the card.
written to the card.
Action:
Set card protect to OFF.
Display: Write-protected
Cannot write card
Situation:
The card’s write-protect switch is on.
Action:
Refer to the owner’s manual for the CF card
and switch off the write-protect switch.
Display:
Cannot change to
AR-2000 card.
AR-2000 card.
Situation:
Because the card is in AR-2000 format, setting
changes and the like cannot be written to the
card.
changes and the like cannot be written to the
card.
Action:
Convert the card to AR-3000 format, or use
another card that is in AR-3000 format.
Display: Battery
low.
Replace battery.
Situation:
The voltage of the card’s battery has dropped.
Action:
Replace the battery for the card.
Playback Related
Display:
Cannot play back.
Check phrase.
Check phrase.
Situation:
Either the phrase data is damaged, or the AR-
3000R is not able to handle the phrase.
3000R is not able to handle the phrase.
Action:
Check the phrase for which the message was
displayed.
Display: No
corresponding
phrase.
Situation:
There is no phrase corresponding to the
specified phrase.
specified phrase.
Action:
Select a saved phrase or record a new phrase.
Recording Related
Display:
No signal from
Digital In jack.
Digital In jack.
Situation:
There is no signal input from the Digital In
jack.
jack.
Action:
Send signals from the digitally connected
equipment.
Display:
Card access error.
Change conditions
Change conditions
Situation:
Data was not written to or read from the card
in time.
in time.
Action:
Change the RDAC-Grade, RDAC-Mode, or
other recording conditions to reduce the
other recording conditions to reduce the
amount of data.
AR-3000R_e.book 132 ページ ２０１０年３月１８日 木曜日 午後２時６分