Roland AR-3000R 用户手册

下载
页码 152
 
24
 
Turning the Power On and Off
 
Turning On the Power
 
941
 
devices in the order specified. By turning on devices in the wrong order, you risk 
causing malfunction and/or damage to speakers and other devices.
 
Power on your equipment as described in the following. After the devices 
are powered on, set the volumes to each connected devices equipment.
 
Connected devices 
 
 
 AR-3000R 
 
 
 Power Amplifier etc.
 
1
 
Confirm the volume levels on the AR-3000R and any amp or 
mixer that is connected turned down to the lowest settings.
 
2
 
Press the POWER switch to turn on the power.
 
3
 
Watch the display.
 
* This display is only an example for illustrative purposes, The content of the display 
will differ depending on the card settings.
 
Turning Off The Power
 
1
 
Confirm the volume levels on the AR-3000R and any amp or 
mixer that is connected turned down to the lowest settings.
 
2
 
Switch off the power of the device in the reverse order of that 
used to switch on the power.
 
The display will go dark, indicating that the power has been turned off.
 This unit is equipped with 
a protection circuit. A brief 
interval (a few seconds) 
after power up is required 
before the unit will operate 
normally.
 
942
 
To avoid risk of electric 
shock, do not touch the 
connectors while the unit is 
in operation.
 
If you need to turn off the 
power completely, first 
turn off the POWER switch, 
then unplug the power 
cord from the power outlet. 
Refer to 
 
 
 
945
AR-3000R_e.book 24 ページ 2010年3月18日 木曜日 午後2時6分